Check Valve

Check Valve
Where is the check valve is in my sprinkler system? I have to prime the everyday to ittowork. HELP?

I take photos of my pump and pipes and email who can help me with my problem. I have an idea of where the check valve, but I can not get to it without cutting the pipe. Please help me

The check valve is located before the pump suction side. Go ahead and cut the plastic tube on both sides of the check valve to eliminate it. Glue the right side of the valve back in the tube going to the well. You can say which way is right by the arrow on the valve. The arrow should point towards the pump. If you do not have enough pipe from the pump, use a new piece between the valve and pump. Good Luck!

Swing Check Valve

eBay Logo  

Dennerle CO2 Check Valve


Dennerle CO2 Check Valve


$24.99


Viair 92831 1/4 NPT Nickel Plated Check Valve


Viair 92831 1/4 NPT Nickel Plated Check Valve


$6.95


Viair 1/4 inch female to 1/4 inch male check valve keeps built-up air pressure from escaping from air tanks….

CHECK VALVE QUIET WHT 2 [Misc.]


CHECK VALVE QUIET WHT 2 [Misc.]


$14.80


“BRADY” SILENT CHECK VALVE

2″ on both ends
Silent check valve provides silent operation
Eliminates the slamming noise when the check slams shut
2″ PVC couplings for easy solvent weld installation
For use on all 2″ PVC sump and sewage pump discharges…


SHURflo 340-001 In-Line Check Valve


SHURflo 340-001 In-Line Check Valve


$11.99


In-Line Check Valve Allows flow in one direction only to safeguard against backsurge up to 100 PSI (6.8 Bar)….

Valve Handbook 3rd Edition


Valve Handbook 3rd Edition


$64.28


Comprehensive, up-to-date coverage of valves for the process industry Revised to include details on the latest technologies, Valve Handbook, Third Edition, discusses design, performance, selection, operation, and application. This updated resource features a new chapter on the green technology currently employed by the valve industry, as well as an overview of the major environmental global standa…

Valve Selection Handbook, Fifth Edition: Engineering Fundamentals for Selecting the Right Valve Design for Every Industrial Flow Application


Valve Selection Handbook, Fifth Edition: Engineering Fundamentals for Selecting the Right Valve Design for Every Industrial Flow Application


$92.56


Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Though there are only four basic types of valves, there is an enormous number of different kinds of valves within each category, each one used for a specific purpose. No other book on the market an…
admin posted at 2009-11-21 Category: Uncategorized